What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 04:47
First Sentence:
Edit 2024–10.
In schematic diagrams this is the symbol for a fuse:
UFC on ABC 8 live updates: Results, round-by-round coverage of every fight from Baku - MMA Junkie
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But it can get overloaded, and no longer works.
The First in 30 Years: Scientists Discover New Class of Antibiotics - SciTechDaily
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–10[John johnson John Johnson ]
Dementia: Switching to MIND diet even later in life can lower risk - Medical News Today
what exactly is a ‘surge’ protector?
Now when you have a certain ac resistance, then a current flows in a loop.
a photo is worth a thousand words.
The third is lightning and “how it gets conducted into a home.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–16 [ OO OLAOYE OYEBODE ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
[image of Common-mode choke]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
It also is a device that limits the change in current flow.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Xbox sale round-up June 17, 2025 - TrueAchievements
An AC voltage/ current source, and an ac inductive load.
I post the exact comment here.
but this device (an Inductor) … impedes the rapid changes in the current.
A fuse is a non-resetable over current circuit protector.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
nine
Why is going on a date today so much different than it was when I was young?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
These are simplified answers to the original question, and does not change anything I wrote above.
There are two important concepts here.
The bolt then partially travels down the line to your home.
Upvotes:
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Mission Control: Eye of the Storm - NASA (.gov)
What is lightning?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then describes Rainy Season and Lightning.
Farewell to the Penny — A Tiny Coin’s Outsized Legacy - PYMNTS.com
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
[old diagram got deleted by accident]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This one hit behind the barn.
One
David Hogg to depart as DNC vice chair after months of turmoil - The Washington Post
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is where the MOV conducts again, and dissipated the energy.
The other is “what does a “fuse” do?”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
A circuit breaker is similar, but is resettable.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What does a fuse do?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Barnstars:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
There are three different concepts here that are getting confused.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But… the neutral is now “floating” because of the 1 ohm resistance.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then asserts :
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Because the load is inductive, the current lags the voltage.(by a bit).
Here is a simplified AC power diagram.
(Dc diagram shown, AC is similar).
So, the voltage could go up to 500 volts, and the fuse will not open up.
He then describes the function of a fuse.
This is 'the assistant's answer'
This device then solves the entire problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, what happens?
but I think this circuit , shows a few more pieces.
One is “what exactly is in a ‘surge protector’ ? ”
the problem then depends on "how fast does the fuse operate?".
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At least they know the answer if they wanted it.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
For this case there are devices called Metal oxide varistors (MOV).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These devices are installed between the “hot” and “neutral” and protective ground.
eight
It seems Mohan does not understand the difference between a comment and an Answer.